&≥1DCLKQQ̄=1MUXS
cmd.exe — hardware_sys
SRC
DST
SYS_ARCHITECT
[ SYSTEM ONLINE ] : STATUS OK

Hardware &
Embedded
Systems.

Architecting the physical layer. Expertise in VLSI design, custom PCB routing, RTOS, and complex robotic system integrations. Bridging the gap between silicon and software.

EXPLORE_WORKSEND_SIGNAL
// Current focus
while(1) {
design_pcb();
write_firmware();
optimize();
}
ARMCortex-M7STM32H743ZI480MHz • 1MB FlashR1C4LED1Y1 8MHzL1REV 3.7 | 4-LAYER | FR4 1.6mm | ENIGPORTFOLIO-PCB-V1
01 // System Specifications

Silicon to Signals.

> START SYSTEM DIAGNOSTIC...> Hello, I'm an Embedded Systems & VLSI Engineer with a core focus on architecting hardware that scales. Whether it's designing multi-layer high-speed PCBs, verifying complex RTL in SystemVerilog, or writing bare-metal firmware.

> My toolkit includes Altium Designer for schematic/layout, ROS for autonomy stacks, and heavy C/C++ architecture for microcontrollers. I thrive on closing the gap between abstract software concepts and concrete electronic physics.

15+

PCB Designs Fabricated

1M+

Gates Verified in FPGA

tty1 — root@hardware-sys
Executing boot sequence...
root@sys:~# ./init_hardware_scan.sh

[OK] Initializing JTAG Interface...

[OK] Checking I2C Bus... 3 devices found.

[OK] Loading FPGA Bitstream...

[!!] WARN: Overclocking Cortex-M4 at 240MHz.

root@sys:~# start_perception_node
Process running...
02 // execution_history
/* ═══════════════════════════════════ */
/* execution_log.c — Compiled with: */
/* arm-none-eabi-gcc -O2 -mcpu=m7 */
/* ═══════════════════════════════════ */

System Logs.

03 // PROTOTYPES_AND_PRODUCTIONS

Engineering Showcase.

04 // transmit_signal

Establish
Connection.

> Ready to transmit data. Whether it's a new fabrication run, a complex robotics system, or low-level firmware optimizations.

ping@hardware.sys
FREQ: 2.4GHz ISM
transmission_protocol.sh